Putting steel products to the test | FASTENER EURASIA MAGAZINE
Güncellendi
preloader
saved
Operation Successful !

Thank you for choosing us

loader

fischer outdoor exposure rigs on the island of Heligoland

Salty sea air and high humidity: the fischer Group of Companies is testing the corrosion resistance of its steel products on the German island of Heligoland.
The steel fixing products of the fischer Group of Companies travel back to the island again and again. They travel by car from the production site in Tumlingen to the Port of Hamburg from where they cross by ferry to Heligoland, Germany’s only deep-sea island.

Here, in the midst of the North Sea, the steel products find their new home for the next few years, situated on test rigs on just one square kilometre of “red rock”. The test rigs don’t always go unnoticed by the tourists who arrive at the nearby southern Harbour by catamaran or boat. The purpose of the anchors, screws and components carefully arranged on aligned plates or concrete and wood blocks does not always immediately become apparent.

The setup is an outdoor exposure rig, which the fischer Group of Companies has been transferring its products to since 2006 in order to examine their corrosion behaviour. This involves testing whether the steel changes due to the physical or chemical reaction with its environment, thereby impairing the product’s function. “Heligoland is a highly corrosive area”, explains Sebastian Schilling, who is responsible for the corrosion and materials test laboratory of the fischer Group of Companies. “Our steel products are exposed to the damp environment and the high salt content in the air, especially since the test rigs are situated close to the harbour”. fischer tests its fixing solutions for their corrosion behaviour on their own as well as anchored in concrete, wood, natural stone or as a multicomponent system, for instance set up as a thermal insulation system. “The samples are documented, removed or replaced at least once a year”, Schilling says. “We test products with new materials or surface coatings on Heligoland in assessable timeframes and under real conditions”.

Practical tests increase safety

These tests are important, as in Germany alone corrosion causes annual costs amounting to billions, not to mention accidents and injuries. One memorable example is the collapse of the roof of the Kongresshalle conference hall in Berlin in May 1980. One person died in the building’s wreckage. The collapse was caused by rust on load-bearing elements. There was also an unforgettable incident on the coast of Brittany in 1999: 11,000 tonnes of oil spilled into the sea through the rusting hull of the “Erika” tanker, polluting 500 kilometres of beach. Corrosion damage to fixings can be just as fatal. This was the reason why a 200-tonne concrete roof of the Uster indoor pool in Zurich collapsed in 1985, burying 40 people beneath it. 12 people lost their lives in the accident. In order to prevent tragic incidents such as these, projects require professional corrosion protection for the smallest components such as steel anchors. Suitable materials and measures vary depending on the environmental conditions.
“Facades, roofs and other structural components can collapse due to corroded fixings”, Sebastian Schilling confirms. “Which is why we test our steel products in real conditions. This allows us to protect projects from corrosion and therefore prevent accidents, injuries and high costs”. The fischer Group of Companies operates additional test rigs, for example in the Gotthard Road Tunnel as well as the Wersten (Düsseldorf) and Burgholz (Wuppertal) tunnels. Additional facilities are due to be set up at production sites of the fischer Group of Companies, thereby covering all of the prevailing global climate zones.

The results of the tests are directly incorporated into fischer’s technical recommendations, publications, presentations and committee activities.