Securely connected and well thought out design | FASTENER EURASIA MAGAZINE
Güncellendi
Operation Successful !

Thank you for choosing us

loader

Hinge with Fastening Bracket

Dirak has developed a hinge with fastening bracket, which ensures a precise fit in the rectangular cutout and allows for easy installation using only one screw. Additionally, the seals on the hinge provide protection against the ingress of water and dust.
 
Hinge Pr01 180°: Securely connected and well thought out design
 
1. The stepped mounting surface on the back of the hinge allows for easy alignment and a precise fit in  the cutout
 
2. The fastening bracket allows for easy installation using only one screw per hinge half
 
3. IP 65/67 according to DIN EN 60529 (uniform sealing after tightening)
 
4. The use of oversized cutouts allow for vertical and horizontal adjustments
 
5. The recessed fastening bracket is designed to connect to the back of the hinge to prevent the hinge from twisting
 
6. The hinge halves can be mounted independently to the door and frame parts
 
7. The hinge halves can be assembled by hand using the two-part POM hinge-pin (disassembly is no longer possible after the POM hinge-pin has been assembled)
 
8. Six knuckles in the hinge’s design ensure strength and durability