CONTROLRIV: Indispensable to Keep Your Work Under Control

The Italian Rivit’s CONTROLRIV is the system that helps you to monitor your rivet nuts and blind rivets assembling operations.

The system is connected to the riveting tools, and according to the predetermined settings made by the operator, the work of the tool is monitored in real time in order to avoid mistakes and deactivations; the results are improved productivity, higher standard of work and reduced waste.

The system features a display, easy-to-understand procedures and a PC interaction program to set up and control activities in a few steps.
Monitoring of the assembling operations develops by the study of the curves, through piece and batch counters, and work lists.
Work monitoring is supported by stored set batches data and by all check activities, either with positive or negative results.
For what concerns working phases, visual and sound alerts have been designed to highlight the correct or wrong applications, and particularly the lack of air in the latter case.
The system features a pneumatic valve that turns compressed air on and off, to safely secure the whole, best distinguish the working phases from the configuration ones, and prevent further errors in the event of a wrong application result.
The Basic Model works with tools for rivet nuts RIV938, RIV939, RIV941, RIV949 and RIV916B, and with tools for blind rivets RIV503, RIV504, RIV505, RIV508, RIV511B and RIV300.

 

Date : 17.05.2018